Ukulele-RoySakuma.com

Ukulele History

Image of Martin 3K Professional Ukulele
Image via Wikipedia

Roughly translated as “jumping flea”, the ukulele has long been associated with music from Hawaii, where it originated and was developed as a concoction of the Madeiran braguinha and raj√£o.  Being similar in appearance as the cavaquinho, the braguinha originated from the city of Braga, thus its name.  With regards to its tuning, the Madeira raj√£o is tuned D-G-C-E-A, while the Portuguese cavaquinho is tuned D-G-B-D, in G-Major chord.  Both the D and G strings are re-entrant, which means that they are always tuned an octave higher than what is usually used in regular low-high string course.  The GCEA strings of the raj√£o, on the other hand, is the basis for the tuning of the modern ukulele.

Ukuleles made from Koa wood or Acacia Koa is one of the most expensive types of ukuleles today, which can easily sell for thousands of dollars.  They are well-known for their elegant color and appearance, as well as their exceptional tone.

US Mainland

During the Panama-Pacific International Exposition, the ukulele started to gain popularity due to the regular performances by the George E.K. Awai and his Royal Hawaiian Quartette in the Hawaiian Pavilion, which featured an ensemble of guitars and ukuleles.  These performances started a fad for Hawaiian-themed songs among Tin Pan Alley songwriters.  They were also the one who introduced the lap steel guitar and ukulele in the United States mainland music, where it was highly popularized by theatre performers in the likes of Cliff “Ukulele Ike” Edwards and Roy Smeck.

The ukulele then started to become an icon of Jazz Age, attributable in part to its portability and inexpensive nature, which also have become a hit for amateur musicians coming into the year 1920.  This can be seen in the introduction of tablatures for ukuleles in most music sheet publications at that time.  Examples of well-known manufacturers of these instruments include Harmony, Regal and Martin.

Reblog this post [with Zemanta]

Tuner Types

Violin pegbox, manipulated to show peg
Image via Wikipedia

Tapered Wood Tuning Pegs – Vintage ukuleles, in the old times, make use of round tapered piece of wood that has knob on one end and a slit on the other to keep the string in place.  It is very much similar to the tuners used for violins.  This type of tuners has served their purpose well in those old times, but has also been known to easily get damaged, and replacing them proved to be a cumbersome task.  In the event that wooden pegs slip, all you have to do is just coat them with resin in order to let the friction work again.

Vintage Friction Tuning Pegs – By now, you might already have an idea that one of the weaknesses of vintage ukuleles are the tuning pegs consisting of small tightening screws, as well as the plastic tuning knobs which are very easily broken even with careful use.  The problem lies mainly on the “crystallization” of the plastic, which in turns results to cracks and splitting of the tuning knob.  And since the screws used here are so small, they cannot handle that much stress each time they are tightened.  In the current time however, screws used in friction tuning pegs are now made heavier and more durable.  The only problem with vintage tuning equipment is that manufacturers do not make a direct replacement for these tiny shaft friction pegs.  Your best bet will only be at eBay, probably by buying a whole vintage ukulele and salvaging some spare parts from it.

You might also be wondering if the newer friction tuning pegs can be used with your vintage ukulele.  The answer is a big NO!  In order for this to be possible, you will need to drill bigger holes through the headstock of your ukulele.  Besides this, you will also need to make some openings for the top guide bushings if you are planning to use the newer tuning pegs.

Modern Friction Tuning Pegs are known to have denser shafts, larger tightening screws and more durable and crack-resistant plastic knobs.  And because of the bigger and heavier shafts, you will still need to drill a hole that is around 3/16” in diameter through your ukulele’s headstock.

Currently manufactured friction pegs also feature a top guide bushing, which is able to support the tuning peg shaft, although this will in turn require an opening to house the bushing.  Some tuning pegs, and usually the best ones, also require bottom openings, and they do not rely on the friction between the headstock and knob in order to maintain the tension of the ukulele string.  They instead make use of 2 friction chambers in order to keep the strings in place.  A good example of this is the Grover 4’s.

There are also spring-load friction pegs available in the market.  They feature thumb-locking devices in them, sound really well, but are quite cumbersome and tends to add additional weight on the upper portion of the ukulele.

Simple Open-Geared Tuning Machines – These multi-geared tuning devices feature a sealed gearbox that is pre-lubricated, as well as top guide bushings.  These types of tuners were specifically designed to prevent the ukulele from being top-heavy, which is especially required for soloists.

Reblog this post [with Zemanta]

String Types

ukulele strings packaging
Image by bunky’s pickle via Flickr

Gut Strings – Italian gut strings have already been in production in the beginning of the 17th century, in places such as Verona, Venice, Padoa, Vicenza and Treviso.  Historical data provides evidence that these type of materials were manufactured consistently well going into the 20th century.

Since the conception of the ukulele in the year 1879, they have been using strings made with natural gut.  It is this type of string that has gained so much popularity in the market, until the discovery of the nylon made by DuPont in the advent of the World War II.  Aquila gut strings have been well known for making the finest gut strings, making use of the freshest gut available, which is in-line with the customs and traditions in Vicenza.

Humidity and changes in temperature can easily affect your old gut strings, and therefore make them out of tune.  Currently produced gut strings now have better coating and are more stable as compared many years ago.  There simply is nothing like the warmth and harmonic tone of real gut strings.

Nylon Strings – Upon the conception of the nylon string, the world of stringed instruments simply was never the same again.  Strings made from nylon typically have more consistent properties and are uniform in diameter while also being able to deliver decent sound quality.  And the best part is, they are really very cheap to produce.

Currently, most ukuleles you will find in the market have strings made from nylon polymers.  It is important to note however that not all nylons are the same.  Each manufacturer will have its own grade of nylon polymer, and this makes each brand unique.  Those cheap, low-quality nylon strings are usually made from the materials used to make the bristles of scrubbing brushes, and it is best to stay away from them.

As for nylon strings, they usually need some time in order to settle down – this can be accomplished by “breaking-in” your strings first.  And even after the strings have settled down, you will still need to make some adjustments in order to set your ukulele to the right pitch.

NYLGUT Strings – Being a patented product line of Aquila, you can expect them to have a much more solid sound as compared to the regular monofilament strings.  The only downside to them is that they tend to be more susceptible to cuts , which means they are less durable than monos.

Fluoro Carbon Strings – This type of string is relatively new in the market and is entirely different and very dense type of polymer.  It has a measurement of 1.6 which has a big difference over the nylon’s 1.3.  Despite the smaller diameter of the strings, they still have incredible durability.  Because of this, the resulting sound of the ukulele is crisp, lively, loud and bright.   With regards to the cost, the Fluoro Carbon string is more expensive as compared to regular nylon, and is usually sold in “double” sets.

Wound Metal Strings – This type of string has been coated with metal in order give the string additional weight but not compromise its flexibility.  Metal windings are commonly used to coat the nylon floss core, which is quite similar to a dental floss.  This coating is very important because without it, the string would have a very dull sound.  Most ukulele users do not prefer this type of string because it can cause some kind of discomfort when you are dragging your fingertips over the string windings.  In order to address this issue, manufacturers now make use of finer metal windings, which are commonly called “studio” quality strings.

Wound Nylon Strings – A lot of manufacturers are now producing a new type of overwrapped wound polymer string.  Flexibility is the primary feature of this string, and also has excellent sound quality.  The only problem with this string is that you won’t be able to cut the string off because doing so will undo its winding and therefore will destroy your string.

Steel Strings – This is one of the worst types of strings you can put in your wooden ukuleles.  Although acoustic guitars, banjos and mandolins have metal strings, they are very much different from a ukulele and having metal strings along with it can really produce an unpleasant sound.   And if that’s not enough, you can also easily damage your wooden instrument in the event that you over-tighten your strings.  An exception to this would be the recently designed baby “electric guitar” ukuleles which were made to accommodate metal strings only.

Reblog this post [with Zemanta]

Wood Types

Acacia koa (wood).
Image via Wikipedia

Different kinds of wood can be used in making ukuleles.  Each one will bring a unique beauty, tone and luster to your musical instrument.

One of the more commonly used species of wood is the Koa wood.  This wood has gained reputation as the best hardwood in Hawaii.  The Acacia Koa is native to the forests of Hawaii, and is given that much respect.  In the Hawaiian language, Koa means bold.  When someone mentions about Hawaiian ukuleles, you can’t help but think about the excellent sounds and exquisite craftsmanship that only Koa wood can provide.

Another well-known species of wood is the Hard Rock Maple.  This wood is popular for its sturdiness, heaviness and resistance to damage, which also gives the ukulele a more trebly tone.

Mahogany wood has medium range density, usually has a redish color and tends to be bassy and bright.  This wood is also best used with maple and is the material of choice for ukulele bodies, as seen in the vintage types.  Despite its lack of eye-catching grain patterns found in wood, I personally like this one when it comes to the quality of sound produced.

Rosewood is available in a variety of colors and textures, and is currently utilized in the making of fretboards.  Try listening to a ukulele made of this type of wood and you’ll find the tone quite round and sweet.  Brazilian rosewood has already been extinct for a long time now, but there still are other species available.

Redwood on the other hand is very tough and durable, and give the ukulele a deeper bass sound.  Imbuia also is quite similar, but is considered to be more on the exotic side because of its magnificent grain patterns: a perfect choice for the tops and back of the ukulele.  Ebony, which is also used in the black keys found in pianos, is also used in ukuleles to make the fretboard.

Maple has excellent density and very durable.  It gives the instrument more treble.  Variants of maple include spalted, flamed, curly, quilted and burl.  Grain patterns can also be found here.  Spruce is more of a close-grained wood, used to lend the ukulele an elaborate and dynamic tone.  As for me, I love the mid-priced ukuleles which have soundboards made of spruce, and sides and backs made with mahogany.

Cedar wood has colors ranging from light to reddish, and is mainly used to make the soundboards.  The best sounding ukuleles I have had were made with cedar wood, which was made by a local luthier.  The wood slats used came from the maker’s back yard fence, which is already 40 years old.

Composite woods refer to types of ukuleles made with plastic, which has prints of wood in it.  Typically, small stringed instruments need to have a very thin construction, which is usually 0.0625 in thickness.  Based on this measurement, the wood can have some tendency to easily break or have grain separations when it is left to dry.  In order to solve these problems, manufacturers have designed what is called composite type of woods.  Quite simply, these materials can also be called “plywood”, but is very much different from the ones you see in junk yards.

Composite materials are specially designed for use with musical instruments.  With this type of material, instruments can be made as thin as possible without compromising its durability.  Although the finest and most elegant types of ukuleles are the ones made with natural wood, more and more people are becoming practical and would rather have composite instrument that almost have the same quality with their expensive wood counterparts.

High-quality composite musical instruments are now common these days.  A good example is the Hohner Lanikai collection, which are well-known for their excellent sound quality and bang for the buck.  But if you have the money to spend, then the wood variants of ukuleles is still the best choice, they are simply unrivalled in term s of sound quality and beauty.  Just make sure you properly take care of them.

Reblog this post [with Zemanta]

Wood Finish

New ukulele day! // back
Image by Monsieur Gordon via Flickr

There are different varieties of finishes for ukuleles, these include gloss, satin and varnish.  Ukuleles with satin finish have a matte and soft appearance, making them very appealing for customers who have a taste for natural-looking instruments.  In this setting, nitrocellulose lacquer finish is used.  Since the satin finish is more convenient to administer, the costs are usually lower for it, making them more affordable.  Classic ukuleles usually have this type of finish, and this is due to the fact that the new high-gloss automotive-type finishes haven’t been invented in that time.

The newer gloss finish have very elegant, bright and mirror glow which highly accentuates the color and grain patterns of the wood.  They are also very durable.  Since there more work done in this type of finish (this includes the application and buffing of the gloss finish), this type is more expensive when compared to satin finishes.  Nowadays, more and more people are making the switch to this kind of finish.  Ukuleles with lacquer finishes typically gives them superb tone and volume.

The varnish type of finish, which is also known as the “French Polish”, is the most traditional of all finishes – making use of natural resins which are combined with spirit solvents.  The concoction used is then applied manually and polished thoroughly in order to give the ukulele a very thin and protective finish.  The varnish finish is an excellent way of retaining the acoustic properties of the ukulele, allowing the wood to vibrate freely too.  This type of finish does not really look perfect at all, but better looking varnishes can commonly be found on acoustic guitars and violins.

The French polish finish is essentially done by dissolving resin in alcohol, which is then administered in the wood with the use of a small cloth pad.  Despite the name, this type of finish is not considered the same as furniture polish, but more of a lacquer finish.  This type of finish is also very labor-intensive and the process may take a long time because of the work being 100% manual.  Because of this, the varnish finish is the most expensive of all ukulele finishes.  For me, these three types of ukulele finishes does not make much of a difference at all – try playing these 3 types in a dark room, you hardly won’t notice any difference in the sound produced.

To make things simpler, it is best that you base your decision on the sound quality of the ukulele you are about to buy, and not on the finish.

One important thing to remember is that whatever you ukulele’s finish is, they all require proper care and maintenance.  Refrain from using rough picks, and make sure you don’t scratch the body of your ukulele with your fingernails.  Always keep a clean polishing cloth with you to keep your ukulele shiny.

Reblog this post [with Zemanta]

Intonation

Filipino musical instruments
Image via Wikipedia

Intonation

Intonation, as taken from the definition of Wikipedia, states: “Intonation, in music, is a musician’s realization of pitch accuracy, or the pitch accuracy of a musical instrument.”  Having what is known as “bad intonation” means that the musician is playing or singing out of tune.  Intonation can also refer to tuning.

Strings

When it comes to stringed instruments, intonation matters a lot more than with other musical instruments.  Since majority of stringed instruments are unfretted, the note can easily go out of tune in the event that a finger is too high or too low, even if it is less than an inch.  In order to have good intonation, a musician needs to have years of practice and experience, which makes this the most difficult part of mastering a stringed instrument.

Ukulele Intonation

There are some individuals, more commonly guitar players, who often ask me if there is a ukulele which has superb intonation but costs little, I always tell them the same thing over and over again: “Forget it…”

Despite the majority of ukulele fretboards manufactured today being cut precisely by computer-guided laser cutters, issues sometimes exist in relation to the free string configuration of the ukulele, which is extremely short, and makes perfect intonation quite hard to attain.  Also, ukulele strings which were made from plastic materials like nylon are not very precisely constructed as compared to their steel counterparts – those which are usually installed on banjos, mandolins and the ever popular guitar.  Strings made of plastic tend to expand and eventually become flat, making them quite hard to use during the initial stages of use.  And if that’s not enough, getting the right intonation greatly depends on the skills and experience of the musician.  Intonation will also change in relation to the key played.

Ukuleles have long been known as the instrument of “innocent merriment”, period.  They provide hours of fun and enjoyment with every use, although they can’t be considered as acoustic physics laboratories having small sound chambers.

With guitars, most people will usually invest a lot of money making modifications in order to have better intonation, and the ukulele not much that different.  Even if the ukulele you are looking at right now is said to have the “prefect intonation”, chances are there is something fishy about it.

If its the intonation of your ukulele that is giving you headaches, it may be a good idea to purchase strings of better quality such as well-known brands Worth and Aquila.  You may be surprised on the really big difference this change will give.

Intonation can also be achieved based on how relevant the note played is to the pitch as the musician moves up the fingerboard.  In order to check the set-up of your ukulele, the 12th fret needs to sound exactly the same when played on an open string at a higher octave.  For example, open A string first course 440Hz, 12th fret 880Hz).  Playing a 12th fret harmonic and comparing it with a fretted 12 fret note is also a good way of checking your ukulele.  A good instrument will always be able hit each note played exactly to the required frequency.  Example is G=392 Hz, C=261.6 Hz, E=329.6 Hz, etc.

When constructing a good instrument, intonation is always an integral part of its overall quality.  Playability is also another important factor considered by musicians.  How do we actually acquire that much needed intonation?  Most people will tell you that it is just as simple as making the measurement from the 12th fret doubled, but the truth is, it just does not work.  Always keep in mind that the instrument you are using contracts and expand, and that wood also breathes.   The playing style of a musician can greatly influence the intonation of a instrument – someone who strums hard and bends the strings too much when playing the instrument makes more of a noise rather than music.  On the other hand, a good musician will do the exact opposite and you feel like the instrument and the musician playing as one.

Reblog this post [with Zemanta]

Tone and Harmonics

Picture of ukuleles in the Ukulele House, Hono...
Image via Wikipedia

Most people usually conceptualize that because the strings of a ukulele are fixed at each end, they will resonate in the same frequency.  As it turns out, this idea is false.  The idea here is, in the event that the string induces vibrations on the soundboard, standing wave patterns are created – this contains the entirety of all present harmonics.

For every time the ukulele string is plucked, the vibrations created behave like waves which travel to and fro the medium being directed at each fixed end.  There are particular sizes of waves which can last while on the medium, waves which won’t cancel each other out as they are directed back onto themselves.  These types of waves are referred to as harmonics.  They are classified as standing waves and deliver non-moving sound patterns.

In the case of a ukulele string, there are quite a number of harmonically-related standing wave patterns that can be produced.

The first pattern, known as fundamental or first harmonic, possesses the longest wavelength of all.  Next is the second harmonic, which is also known as the first overtone, has a wavelength half that of the first harmonic and also two times its frequency.

As for the third harmonic, it only has a third of the wavelength of the first harmonic, and triple its frequency.  Based on these patterns, the succeeding harmonics has the same set-up when it comes to the frequencies and wavelengths.  The harmonic patterns produced in a ukulele will always depend on the way the ukulele string is plucked.

The pitch of the note we hear from the ukulele is relative to its fundamental frequency, while the timber of its sound is relevant to the sum of all harmonic structure.  This concept can easily be seen when you play both a trumpet and a clarinet at the same note – the sound heard from each instrument can easily be distinguished.    In the two instruments, they have the same fundamental frequency, but each has its own harmonic envelope which gives each instrument its own character.  This concept is therefore also applicable to ukuleles, in that the concert, soprano, baritone and tenor produce different sounds because of the difference in their sizes.

Besides the size of the ukulele, the sound produced can also be affected by other factors.  These include the overall structure of the body, the firmness of the soundboard, the quality of the strings used, and the ability of the materials used in the ukulele in absorbing or reinforcing sound.

For example, ukuleles made with plastic bodies and backs will sound a lot different than those constructed of wood.  Another type of soprano ukulele, commonly known as the Pineapple-shaped soprano, boasts a more throaty tone as compared to the traditional-shaped soprano.  This sound difference is, of course, attributed to the difference in body shape.

For ukuleles made of wood, the sound produced will greatly depend on the type of wood used, its thickness and its internal bracing.  Those which are constructed with bulky soundboards produce dull tones and do not have the same sharp “bark” possessed by ukuleles made with thin soundboards.  Also, bulky soundboards are known to have extremely short tone resonance.

High quality ukuleles have the ability to produce better sounds, thanks to the careful selection of construction materials used for the instrument.  They always make sure that the materials used will have the longest resonance and work well together.  Also, the type of wood and density is taken in consideration, making sure that the instrument can resonate freely and at the same time durable.  Different species of wood can be used in making ukuleles.  Examples include Spruce, Mahogany and Koa – all lending a unique sound to the instrument.

Many old-fashioned ukuleles in the market today typically produce better sounds today as compared at the time they were built 7 decades ago.  This is because of the internal stress undergone by the body over the years, which consequently relaxed it therefore giving it better resonance.  These instruments are very sensitive, that even relative humidity can easily affect the quality of sound produced.

Based on my experience, newly made ukuleles can sound much better once they have been used for around a year.  It is only at this time that they are considered to be matured – just like with old violins which are sought after for their mature sound.

When it comes to ukulele strings, always buy from reputable string manufacturers.  High quality strings typically are uniform in diameter, have excellent durability, more flexible and give your ukulele that distinct sound.  Never buy inferior quality strings – these are usually made with the polymer used in the bristles of scrub brushes.

There is a well-known song entitled “Little Brown Jug” that says: “…if I had a cow that gave such milk, I’d clothe her in the finest silk…I’d feed her on the finest hay…and milk her 40 times per day.”  Like the song goes, once you find the ukulele that will fit your preferences, make sure that you provide it with the best care: buying a protective case for it, supplying it with only the highest quality strings, and using it as often as u can!  Enjoy!

Reblog this post [with Zemanta]

Sizes of Ukulele

Image of Martin 3K Professional Ukulele
Image via Wikipedia

For this type of stringed instrument, four sizes are available, to which the volume and tone are relative to its size.
In Hawaii, the standard-sized Soprano is the preferred ukulele and is also the smallest in size.

By the year 1920, changes have been made with the design, increasing the ukulele’s size and therefore giving it a deeper and louder tone. This was then known as the Concert ukulele.

After some time, a Tenor ukulele came out, with size greater than that of the Soprano and Concert. This consequently translated into increased volume and deeper bass tone. This sound quality can often be attributed to the bass strings of the Tenor ukulele (1-2 strings), which gives it excellent resonance.

The Baritone ukulele comes next, with body width extending to 10 inches and has the DGBE configuration of strings similar to a guitar, which in essence makes it a mini-guitar with 4 strings.

If you are looking for a classic, gentle and bright tune, then your best bet would be the Soprano and Concert ukulele. For a bigger, deeper and more “guitarish” sound, then the Tenor and Baritone is an excellent choice. Despite the popularity of the Concert and Tenor ukuleles, some clients still prefer the more traditional Soprano and Baritone variants.

There are also multiple-stringed ukuleles available besides the regular four-stringed variants. For example, the Concert type ukulele can be custom-fitted with as much as five strings, placing the two upper most strings in high unison. As for the Tenor and Baritone ukuleles, they are also available in configurations of either six or eight strings.

Reblog this post [with Zemanta]

The KoAloha Ukulele

Roy Sakuma wanted to combine the best elements of the various full-size ukuleles he’d played over the years while at the same time going beyond the instrument’s familiar sound.
The result? The KoAloha Ukulele.
Sakuma combined forces with friend, musician and craftsman Alvin Okami, who had already made a miniature ukulele that was fully playable. Together, they created the new, full-size KoAloha Ukulele.

Among the elements Sakuma and Okami have designed into the KoAloha are clarity of tone and acoustic volume, ease of playing and quality of appearance and detail. “It’s very clean when you hit the strings,” explains Sakuma. “There’s a very balanced sound, so you don’t hear one string dominating everything else.”

The KoAloha Ukulele is hand-crafted of native Hawaiian koa wood. Okami’s tremendous technical skills together with Sakuma’s 35 years of experience with the ukulele inspire their quest for excellence.

Roy Sakuma

Roy Sakuma is truly one of the gifted ones.

As a young protege of Herb “Ohta-San” Ohta, dean of Hawaii’s ukulele artists, Roy Sakuma quickly proved himself as a stellar student. When Ohta-San encouraged his disciple to venture out on his own, Roy didn’t follow in Ohta-San’s footsteps as a performing artist. Instead, he devoted himself wholeheartedly to teaching.

Since then, Roy has developed an effective and joyful method to teach anyone to play the ukulele. It begins with the understanding that many people find learning an instrument intimidating – especially if they can’t read music. Using Roy’s unique method, students learn to play and to read music at the same time. The system is fast and fun, about as close as you can get to becoming an instant ukulele player.

Roy and his wife Kathy opened the first Roy Sakuma Ukulele Studio in 1974. Since then, the Studio has expanded to four locations on Oahu with a staff of 25 instructors, all of whom are former students. Lessons are taught using a wide variety of musical styles ranging from traditional Hawaiian music, to pop and rock, to classics and jazz. The effect is to broaden the students’ musical repertoire.

Since 1970, Roy Sakuma and his sponsors have presented the Annual Ukulele Festival in Waikiki. Roy is the founder and executive director of the free Festival, which brings together the finest ukulele players in the world, an ukulele ensemble of over 300 children, and celebrity entertainers from Hawaii and the mainland.
As a record producer, Roy has brought the beauty and versatility of the ukulele to a much wider audience. As well as featuring the ukulele in the traditional setting of Hawaiian music, his catalogue showcases the instrument’s adaptability to rock, pop and jazz. Sakuma’s record label has garnered several Na Hoku Hanohano Awards (Hawaii’s Grammy’s).